Modular system of diphragm seals

Diaphragm seals alone serve no purpose. Only when combined with a measuring device do they form a pressure device system capable of performing a measurement task. The Labom modular system allows pressure transmitters and measuring
devices to be combined in any configuration. Depending on the application, additional components such as temperature decouplers or remote lines may also be included. The modules in the modular system are interchangeable. This means that
the pressure transmitters can be configured and supplied to meet the exact requirements of the customer.

For specific applications, a diaphragm seal can also be fitted with two measuring devices. Typically, a mechanical and an electronic pressure gauge are combined. At a measuring point, an on-site display requiring no auxiliary power is then available, as well as a measurement signal for evaluation in the control room. However, two electronic devices can also be used for redundant measurement. A wide range of configuration options can be implemented using appropriate adapters.